350W Electric Fat Bike Kit

This electric bike conversion kit suits a freewheel style gear set so we suggest either purchasing a hub motor toolkit from ourselves or asking your local bike shop to kindly remove the freewheel from your existing rear wheel and screw it on to your new electric hub motor wheel. You'll need 175mm approx. spacing on the insides of the rear dropouts. The 175mm fitment is only an approximation however we haven't had any documented issues surrounding fitment. There's a bit of flex to be had in the rear stays/rear forks. Just makes sure they're close before ordering! This kit includes everything you need to complete installation onto your fat bike, apart from tools and a threaded freewheel. If you need tools to remove your current gear set, check out our hub motor conversion tool kit which includes the splined cassette tool and some other goodies.

Contents:

Bafang motor: RMG06, controller + housing, battery + charger, LCD display, PAS + throttle, e-brake sensors, wiring, fasteners.

Fitment:

The distance between your rear dropouts needs to be 175mm. You need to have space on the frame for the battery and controller, and if you want to use the pedal assist your bike must have about 4mm clearance on the crank spindle on the non-drive side of the bike.